Multi-disc screw press operating at 2–4 RPM with self-cleaning fixed and moving rings — combines thickening and dewatering in a single unit.
Heat pump dehumidification drying at 50–70°C with closed-loop air circulation — produces Class A biosolids with no exhaust emissions.
Automatic screen/disc filtration with differential pressure-based backwash or suction scanning — continuous inline filtration with zero downtime.
Activated sludge + hollow fiber/flat sheet UF membrane filtration — replaces secondary clarifier and delivers reuse-grade effluent in a compact footprint.
Inclined static/rotary screen combined with screw press dewatering in a single unit — mechanical screening, gravity drainage and pressing for maximum solid removal at the source.
Multi-chamber continuous/batch system for wetting, mixing, aging and metered dosing of powder or liquid polymer — eliminates manual mixing errors.
Physico-chemical separation using 20–80 micron microbubbles — coagulation, flocculation, flotation and skimming in circular or rectangular configuration.
Continuous mechanical screening using a rotating wedge wire or perforated drum — removes fibres, solids and debris from wastewater influent with minimal operator attention.
Heat pump-driven vacuum evaporation operating at 40–60°C — achieves 90–95% water recovery with up to 70% energy savings vs conventional evaporators, enabling Zero Liquid Discharge.
High-rate anaerobic biological treatment converting organic waste into biogas — no aeration required, very low sludge generation, ideal for high-strength industrial wastewater.
| Equipment | Key Metrics | Core Advantages | Typical Applications | Optional Add-ons |
|---|---|---|---|---|
| Screw Press Sludge Dewatering Machine | Feed: 0.2–5% DS | Cake: 18–30% | Power: 0.01–0.05 kW/kg DS | Clog-free, ultra-low energy, up to 80% sludge volume reduction | Municipal STP, Industrial ETP, Food & Dairy, Paper & Pulp, Biogas Plants | PLC Automation, Polymer Dosing, Odor Control Enclosure |
| Eco-Dry Low Temperature Sludge Drying System | Feed: <80% moisture | Output: 10–15% | Energy: 0.7–1.2 kWh/kg water | Up to 90% volume reduction, no steam required, odor-free closed loop | Municipal STP, Industrial ETP, Pharma, Food Processing, Chemical, Textile | Multi-layer Conveyor, Odor Control Unit, Heat Recovery Optimization |
| Self-Cleaning Filtration System | Flow: 5–1000+ m³/hr | Filtration: up to 10 microns | Pressure: 2–10 bar | Zero downtime, <1% flush water loss, automated ΔP-triggered cleaning | ETP, STP, Cooling Tower, Process Water, Paper Industry, Food & Beverage | SS316 Construction, Multi-Element Systems, Remote Monitoring |
| Membrane Bioreactor (MBR) System | BOD >95% | COD >90% | TSS >99% | MLSS: 8,000–15,000 mg/L | Reuse-grade effluent, 50–70% smaller footprint, no secondary clarifier | Municipal STP, Hotels & Resorts, Pharma, Textile, Industrial ETP | UF/RO Polishing, SCADA Automation, Tertiary Disinfection |
| Inclined Screen with Dewatering System | Throughput: 5–200 m³/hr | Cake: 20–35% | Power: 0.2–1.5 kW | Dual screening + dewatering, 60–90% solid removal, reduces downstream load | Paper & Pulp, Food Processing, Dairy, Slaughterhouse, Textile, STP Inlet | Variable Speed Drive, Integrated Conveyor, Spray Cleaning System |
| Automatic Polymer Preparation & Dosing System | Capacity: 100–5000 LPH | Accuracy: ±1–2% | Mixing: 30–60 min | 15–30% polymer savings, consistent floc formation, fully automated | STP, ETP, DAF Systems, Clarifiers, Sludge Dewatering | Online Flow-Proportional Dosing, Powder Feeder, Multi-Point Dosing |
| Dissolved Air Flotation (DAF) System | TSS: 90–99% | Oil & Grease: 85–99% | HRT: 15–30 min | Recycle: 20–50% | Compact vs sedimentation, thick sludge 3–6%, handles fluctuating loads | Food & Beverage, Dairy, Slaughterhouse, Oil & Gas, Paper & Pulp, Chemical | PLC Automation, pH Control, Sludge Dewatering Integration, Lamella Pack |